Image
Filling the Gabion structure
Before filling, it is important to check that the posts are properly fastened, vertical, and the correct centre-to-centre distance apart. Then check that the gabion panel is correctly inserted and held in place.
Filling should be performed via the top of the panel.
Image
Installing the panel containing plants
How to install your Botanical panel
Step 1: Positioning the posts
Ensure that the posts are installed precisely in accordance with the centre-to-centre distances.
Image
Installing and adjusting spacers
Do you need to adjust the level of your fencing boards?
You can insert an adjusting spacer under the base rail of the fencing panel to adjust the level of your fencing boards.
Image
Installing a top rail on a Gabion panel
Do you wish to put a top rail on your Gabion panel?
The top rail must be installed with its kit of two connectors.
These two accessories are sold separately.
Image
Cutting an Atmosphere board
Tips? Cutting suggestions for the Atmosphere co-extruded range for decking
Image
Fascia board
Looking for the right final touches for your decking creation? Allow us to suggest the fascia board accessory.
Before fitting fascia boards, the fixed deck boards must be trimmed to an even finish using a straight-edge and a circular saw.
Image
Space between boards
How much space should be left between your deck boards?
It is essential to leave a gap of at least 5 mm in width.
This allows boards to expand with changes in temperature, and also enables water and melting snow/ice to drain away.
This gap between boards must not be obstructed.
Image
Installing Glass design panels
How to place a Glass design panel into fencing
The glass design panel (opaque or transparent) replaces 3 stacked fencing boards.
This design panel can be inserted into the fencing at any height, and must be located between two rails (halfway support profiles, top rail).
Image
Installing design panels with mineral, plant or urban motif
Looking to personalise your fencing by
