Our accessories are made of powder-coated Aluminium, with a sanded finish for improved resistance to impacts and scratches.
Choose your fencing structure and components
We offer a wide range of accessories available in 3 colours: Anthracite Grey, Metal Grey and White.
They bring innovative design and enable installation on post supports up to 1.80 m in height.
3-in-1 high-wind post
Positioned at the start, middle and end of the fence
- Positioned at the start, middle and end of the fence
- Can be cut to a maximum of 1845 mm for installation on a post support
- The removable tab converts it into a corner post or enables installation of a fence post LED
- Dimensions in mm: 70 x 64 x 1260 and 70 x 64 x 2315
Double-shell post support
Dedicated post support for 3-in-1 high-wind post, for improved post hold
Dedicated post support for 3-in-1 high-wind post, for improved post hold
- Dimensions in mm: 108 x 133 x 83
- For a max. height of 1845 mm
Wall start semi-post
This half-moon post is used for starting the fence against a wall, guaranteeing an elegant finish.
This half-moon post is used for starting the fence against a wall, guaranteeing an elegant finish.
- Dimensions: 70 x 35 x 1845 mm
Top rail or base rail
Each panel must have two rails mounted horizontally, one at the top and one at the bottom of the fencing.
Each panel must have two rails mounted horizontally, one at the top and one at the bottom of the fencing.
- Dimensions: 26 x 30 x 1736 mm
Halfway support profile
At least one halfway support profile must be inserted every three boards.
At least one halfway support profile must be inserted every three boards.
- Dimensions in mm: 23.3 x 24 x 1,736
Base plate
Attractive, lightweight and easy to install, it simplifies any installation on sloping ground and immediately creates a flat surface for installing the fencing.
Attractive, lightweight and easy to install, it simplifies any installation on sloping ground and immediately creates a flat surface for installing the fencing.
- Dimensions: 21 x 153 x 1798 mm
- Ultra-light compared to its concrete equivalent
- Replaces a base rail and prevents the first board from coming into contact with the ground
- Matches the posts
N.B. Compatible with the aluminium fencing board as long as a halfway support profile is inserted
- Dimensions: 27 x 9.5 x 1845 mm
- To give the end of the fence an attractive finish
- Dimensions: 27 x 9.5 x 1845 mm
- To give the fence an attractive finish
Dividers
Is only used for openworking aluminium fence boards (not compatible with the Silvadec composite boards)
Is only used for openworking aluminium fence boards (not compatible with the Silvadec composite boards)
- Dimensions: 15 mm
- Packet of 22 dividers (stackable)
Rail connectors
Multifunction connectors to increase the durability of your fence.
1. At the top to link the top rail to the posts:
- Ensure vertical positioning of the post and centre-to-centre distances, • Simplified installation,
- The headless screws are used to fix the top rail.
2. For sloping ground:
- Link the bottom rail to the posts. Installed on a post finishing profile (cut to the height to be compensated), the connector kit ensures each panel is robustly and horizontally fixed.
